TR 60 LCD
|Weight of the gun||1200 g|
|Power Supply||230V (50 Hz) / 120V (60 Hz) on request|
|Power Consumption||480 Watt|
|Degree of protection||IP 30|
|Class of protection||I|
|Temperature limitation||temperature monitor|
|Operating temperature||approx. 50 - 210 °C|
|Consistency of temperature||± 2 °C|
|Heat-up time||approx. 3 - 10 min.|
|Gross Tank Capacity||250 ml|
|Conveying system||Air pressure|
|Operating pressure||0,5 - 6 bar|
|Length of electric cord||4m|
|Length of connections (stand to handgun)||4,5m|
|Recommended melts||Hot-melt granulate, pillows and 43mm sticks|
|Stand for storing with pressure regulator and manometer included||yes|
The TR 60 LCD Hot-Spray-System consists of the TR 60 LCD glue gun and the stand on which the gun may be deposited.
Spray ApplicationThe TR 60 LCD is a hot-melt adhesive spray system. Spray application is a non-contact glue application, which means it goes easy on the materials that are about to be glued. Also, spray application allows covering great areas and using very little glue.
Stand includedA stand for storing with built in pressure regulator and manometer is part of the system and permanently attached to the TR 60 LCD, so setting the right glue output and spray pattern becomes very easy.
Pneumatic Hot-Melt Glue OutputThe hot-melt adhesive is extruded through air pressure. Pneumatic glue guns increase work speed and simplify exact dosing of the glue.
High-Performance Electronic Temperature Regulation with LCD-DisplayThanks to the built in electronic temperature regulation the glue gun is ready to work within 3 to 10 minutes. Furthermore, it keeps the temperature on a constant level thus is a perfect suit for processing temperature-sensitive hotmelt glue. A LCD-display and push-buttons allow a precise temperature adjustment. This way, the user always knows the current temperature of the glue applicator and is able to apply the glue at the intended temperature.
Work with hot-melt granulates, pillow and 43 mm sticksThe TR 60 LCD hot-melt glue gun can be loaded with granulate, pillows and 43 mm slugs. It offers maximum flexibility for choosing the right glue and lets you benefit from cost-advantages of different shapes of hot-melt. The capacity of 250 ml is sufficient for numerous gluings.
Convertible to Point- and Line ApplicationThe TR 60 LCD can be switched to dot- and line application with an adapter.
Additional Nozzles expand Application patternsThe number of possible application patterns is widely extended by the Reka nozzle range. Almost all of the offered nozzles can be used with every Reka glue gun in combination with a separate adapter.
Usual Spray Pattern
Spiral Spray Pattern
Questions about this product / Inquire quotationWe would be delighted to answer to a specific question about this product, or send you a quotation. Simply follow this link and fill out the inquiry..
Assembly spiral spray nozzle
Assembly spray nozzle and nozzle dot/line