TR 80 LCD
|Weight of the gun||1400 g|
|Power Supply||230V (50 Hz) / 120V (60 Hz) on request|
|Power Consumption||650 Watt|
|Degree of protection||IP 30|
|Class of protection||I|
|Temperature limitation||temperature monitor|
|Operating temperature||50 - 210 °C|
|Consistency of temperature||± 2 °C|
|Heat-up time||3 - 10 min.|
|Gross Tank Capacity||310 ml|
|Conveying system||Air pressure|
|Operating pressure||0,5 - 6 bar|
|Length of electric cord||4m|
|Length of connections (stand to handgun)||4,5m|
|Recommended melts||310 ml hot-melt cartridges|
|Stand for storing with pressure regulator and manometer included||yes|
The TR 80 LCD Cartridge Hot-Spray-System consists of the TR 80 LCD Cartridge gun and the stand with pressure regulator and manometer.
Spray ApplicationThe TR 80 LCD is a hot-melt adhesive spray system. Spray application is a non-contact glue application, which means it goes easy on the materials that are about to be glued. Also, spray application allows covering great areas and using very little glue.
Stand includedA stand for storing with built in pressure regulator and manometer is part of the system and permanently attached to the glue gun TR 80 LCD, so setting the right glue output and spray pattern becomes very easy.
Pneumatic Hot-Melt Glue OutputThe hot-melt adhesive is extruded through air pressure. Pneumatic glue guns increase work speed and simplify exact dosing of the glue.
High-Performance Electronic Temperature Regulation with LCD-DisplayThanks to the built in electronic temperature regulation, the glue gun is ready to work within 3 - 10 minutes. Furthermore, it keeps the temperature on a constant level thus is a perfect suit for processing temperature-sensitive hot-melt glue. A LCD-display and push-buttons allow a precise temperature adjustment. This way, the user always knows the current temperature of the glue applicator and is able to apply the glue at the intended temperature.
Work with 310 ml Cartridges (e.g. PUR-Hot-Melt)The spray applicator uses 310 ml aluminium hot-melt glue cartridges, which for instance can contain PUR-hot-melt adhesive or POR-hot-melt glue. The cartridges can be swapped easy and hassle-free. The optional cartridge pre-heater KVG heats up the glue before use and increases the possible glue output per hour.
Great for testing Hot-MeltsA cartridge glue gun in combination with empty cartridges lets you test and process different hot-melts within a short period of time. This is especially useful for working in laboratories or when qualifying a new hot-melt adhesive for a big production line.
Usual Spray Pattern
Spiral Spray Pattern
Questions about this product / Inquire quotationWe would be delighted to answer to a specific question about this product, or send you a quotation. Simply follow this link and fill out the inquiry..
Assembly spray nozzle and nozzle dot/line
Assembly spiral spray nozzle