|Power Supply||120V (60 Hz) / 230V (50 Hz) on request|
|Power Consumption||400 Watt|
|Degree of protection||IP 30|
|Class of protection||I|
|Temperature limitation||temperature monitor|
|Operating temperature||120 °C|
|Consistency of temperature||± 5 °C|
|Heat-up time||3 - 10 min.|
|Gross Tank Capacity||310 ml|
|Conveying system||Air pressure|
|Operating pressure||0,5 - 6 bar|
|Length of electric cord||8,5m|
|Length of air tube||3m|
|Length of connection kit||3m|
|Recommended melts||310 ml hot-melt cartridges|
The TR 700 cartridge gun applies hot-melt adhesives from 310 ml aluminium cartridges in dots, beads, or other standard nozzle forms.
Pneumatic Hot-Melt Glue OutputThe TR 700 lets you apply hot-melt adhesive as dots and lines. The hot-melt adhesive is extruded through air pressure. Pneumatic glue guns increase work speed and simplify exact dosing of the glue.
Thermostat Temperature ControlThe working-temperature of the glue applicator is controlled by a thermostat and set to 120 °C.
Work with 310 ml Cartridges (e.g. PUR-Hot-Melt)The TR 700 glue gun uses 310 ml aluminium hot-melt glue cartridges, which for instance can contain PUR-hot-melt glue or POR-hot-melt adhesive. The cartridges can be swapped easily and hassle-free. The optional cartridge pre-heater KVG heats up the glue before use and increases the possible glue output per hour.
Additional Nozzles expand Application patternsThe number of possible application patterns is widely extended by the Reka nozzle range. Almost all of the offered nozzles can be used with every Reka glue gun in combination with a separate adapter.
Questions about this product / Inquire quotationWe would be delighted to answer to a specific question about this product, or send you a quotation. Simply follow this link and fill out the inquiry..