Nozzles for REKA glue gun MS 80

Compatible nozzles for the Reka MS 80 hotmelt glue gun make it possible to adapt the applicator to individual requirements. For this purpose, different outlet sizes and shapes are available for conventional dot or line application as well as special shapes. Choose the suitable nozzle for your respective requirement. For your records, you will find nozzle overviews for all devices as PDF files in the doownload area.

Preconfigured nozzles

The following nozzles are configured specifically for the MS 80.

Düse Nr. 2 M10 / Nozzle No. 2 M10 Ø 1,75 mm     # 3911 Included in the delivery of the MS 80.
Düse Nr. 3 M10 / Nozzle No. 3 M10 Ø 2,5 mm     # 3905
Spitzdüse M10 / Pointed Nozzle M10 Ø 1,75 mm     # 3901
Schlitzdüse 18×0,5 M10 / Slit Nozzle 18×0,5 M10 Ø 18 x 0,5 mm     # 3681
Schlitzdüse 10×0,5 M10 / Slit Nozzle 10×0,5 M10 Ø 10 x 0,5 mm     # 2642

Illustrations may differ and are not to scale!

Nozzles for simple dot and bead application

The nozzle holder 3961 is required for using the nozzles listed below.

	Düsenhalter / Nozzle Holder M12x1,5 -> M10   # 3961
Düse / Nozzle Ø 1,9 mm   # 1143
Injektionsdüse / Injection Nozzle Ø 1,5 mm # 3504
Verschlussdüse / Threaded Nozzle Ø 1 mm # 3208
Verschlussdüse / Threaded Nozzle Ø 1,5 mm # 3240
Verschlussdüse / Threaded Nozzle Ø 1,9 mm # 3205
Verschlussdüse / Threaded Nozzle Ø 2,5 mm   # 3206
Verschlussdüse / Threaded Nozzle Ø 3 mm      # 3207
Kappe für Verschlussdüsen  / Cap for Threaded Nozzles # 3135

Illustrations may differ and are not to scale!

Nozzle inserts and injection needles

The following nozzle inserts are screwed into the basic nozzle 3508. The nozzle holder 3961 is also required.

	Düsenhalter / Nozzle Holder M12x1,5 -> M10   # 3961
	Grunddüse / Basic Nozzle # 3508
Düseneinsatz / Nozzle Insert Ø 4 mm     # 3502
Düseneinsatz / Nozzle Insert Flat 5,5 x 1,5 mm     # 3531
Kehlnahtdüse / Nozzle Insert Diagonal Ø  4 mm     # 3503
Injektionsnadel / Injection Needle Ø 1,5 mm / 10mm     # 3509
Injektionsnadel / Injection Needle Ø 1,8 mm / 15mm     # 3571

Illustrations may differ and are not to scale!

Adapter nozzle and nozzle heads

The following nozzle heads are used together with the adapter nozzle 3688. The nozzle holder 3961 is also required.

	Düsenhalter / Nozzle Holder M12x1,5 -> M10   # 3961
	Adapter-Düse / Adapter Nozzle Ø 1,5 mm     # 3688
2-Lochdüse / 2-hole Nozzle Ø 1,5 mm     # 3670
3-Lochdüse / 3-hole Nozzle Ø 1,5 mm     # 3671
5-Lochdüse / 5-hole Nozzle Ø 1 mm     # 3679
Verlängerungsdüse diagonal / Extension Nozzle diagonally Ø 3 mm     # 3676
Nadeldüse / Needle Jet Ø 1,2 mm     # 3677

Illustrations may differ and are not to scale!